SD333A Instant glue

◆ Product model: SD333A instant glue

◆ Fast bonding speed, low viscosity, permeability, low white hair, excellent comprehensive performance.

■ use: Widely used in electronic industry ink cartridges and ordinary industry, low viscosity, good permeability, can also be used in rubber, plastic, metal, toys, and other materials bonding.

■Technical parameter

Note: SD-32, and SD-31 are recommended

All the above properties are 25℃, measured after 3 days of complete curing Changes in the environment, temperature, and humidity conditions may vary

■ use ① Use dry cloth or sandpaper to remove the surface of dust, oil agent, steel rust, and then wipe with acetone or trichloroethylene, to clean the surface. ② Open the front cover, and flick the tip part with the finger, so that there is no residual liquid, and then poke the hole with a needle. ③ A small drop of agent in the surface, immediately proceed, and keep until hardening, hardening of the number of seconds to several points; about 30 minutes can be connected to the practical strength, and the maximum strength can be reached after 24 hours. ④ After use, wipe the container tip and cover the lid.

■ matters need attention ① The vapor will prick the mucosa and eyes. ② When touching your hand, wash it with soap, water and pumice. Otherwise, it will condense on the hands after a while. After a few days to recede. ③ Avoid contact with skin and enter the eyes, you should immediately clean with a lot of water and seek medical advice immediately.

■ Packaging, storage and transportation requirements This product is packaged in plastic bottles with 20g / bottle and 1000g / bottle. This product should be stored in a dry and cool place (below 25℃). The shelf life of this product is less than 12 months from the manufacturing date.