SD460 Medium-consistency instant glue
◆ Product model: SD460 instant glue
◆ Characteristics: low smell, low bonding strength, no whitening, soft type, for metal and other rigid materials adhesion impact resistance is superior.
■ Suitable for: plastic, metal, electronics, electrical appliances and other appearance of high demand products.
■technical parameter
|
surveillance project |
SD460 |
|
|
Chemical type |
alkoxy |
|
|
firm Before |
surface |
Colorless transparent |
|
dynamic viscosity（mpa.s) |
45 |
|
|
density(g/cm³) |
1.1 |
|
|
After curing |
shear strength （Mpa） |
18 |
|
Temperature resistance range（℃） |
-55～83 |
|
|
fixation time （s） |
＜30 |
|
|
Full solid time（h） |
24 |
|
|
Maximum filling gap（mm） |
0.10 |
|
Note: SD-32, and SD-31 are recommended
All the above properties are 25℃, measured after 3 days of complete curing Changes in the environment, temperature, and humidity conditions may vary
■ use ① Use dry cloth or sandpaper to remove the surface of dust, oil agent, steel rust, and then wipe with acetone or trichloroethylene, to clean the surface. ② Open the front cover, and flick the tip part with the finger, so that there is no residual liquid, and then poke the hole with a needle. ③ A small drop of agent in the surface, immediately proceed, and keep until hardening, hardening of the number of seconds to several points; about 30 minutes can be connected to the practical strength, and the maximum strength can be reached after 24 hours. ④ After use, wipe the container tip and cover the lid.
Previous: SD401 Medium-consistency instant glue
Next: No More
