SD613 UV-curing adhesive

Brand: SANDAO

MOQ: 10 Pieces

Delivery time: 15 Day

This product is a single component UV-cured acrylic adhesive, light yellow transparent liquid. With low viscosity, strong adhesion, high transparency and good weather resistance. The product has fast curing speed, high transparent after curing, no white, no atomization, PC, PMMA and other plastic adhesion, can destroy the substrate, has good bonding performance, can fully meet the bonding requirements of electronic components.

Product Details

Product Features

Flexibility and stability of the formula, a variety of metals (stainless steel, aluminium alloy, plating layer, special glass, crystal) have a very high adhesion; cured for a long time without whitening, blistering, not peeling; aging resistance performance is excellent.

Performance Indicators and Parameters

Test items	SD613
Appearance	Light yellow transparent liquid
Specific gravity(g/ml)	1.03
Viscosity（mPa.s）	550-700
Surface drying time（s）	10
Curing energy（mj/cm²）	1500
Hardness (Shore D)	58
Surface Resistance（ Ω）	0.8×10¹⁶
Volume Resistance（ Ω·cm）	0.5×10¹⁶
Dielectric Strength (kv/mm)	20
Dielectric Constant (1MHz)	3.2
Loss Factor (1MHz)	0.03
Tensile Strength (MPa)	＞18
Temperature range（℃）	-5～150

Usage

Suitable for glass sticking to metal. Typical industries are glass coffee table, lamp manufacture and other industries.

v Use process

1. Dot (pour) the glue evenly on the surface of the material.

2. with a wavelength of 365 nm ultraviolet radiation, until the glue layer has been fully cured. When irradiation of ultraviolet light as much as possible through the glue can accelerate the curing speed.

3.UV irradiation after curing, there is still overflow of glue around the tool can be used to scrape it awayPrecautions：

1. to ensure that the adhesive layer to absorb sufficient ultraviolet energy in order to achieve the best curing effect, otherwise it is easy to affect the adhesive layer of the bonding properties.

2. the remaining adhesive can not be poured back to the original packaging, should be kept in a sealed room away from light, do not make children come into contact with.

Preservation conditions:

Please store in a cool, lightproof, sealed, ventilated, cool condition storage place, after opening the bottle cap, please cover the cap, unused glue can not be poured back to the original packaging bottle. The best storage temperature is 8-25℃, too high or too low will affect the performance of the glue.