SD104 metal special glue
◆ Product model: SD104 instant glue
◆ Characteristics: metal special adhesive is developed on the basis of α -cyanoacrylate adhesive development of a new product, compared with 502 glue, the curing speed faster, better permeability, better bonding effect, is specially for the small mold bonding and repair tailored, especially for screw cap temporary fixed more ideal.
■ use: For: metal / mold / manufacturing / screw fixing / electronic assembly / metal to other products.
■Technical parameter
|
surveillance project |
SD104 |
|
|
Chemical type |
cyanoacrylate |
|
|
firm Before |
surface |
Colorless transparent |
|
dynamic viscosity（mpa.s) |
2~5 |
|
|
density(g/cm³) |
1.05 |
|
|
After curing |
shear strength （Mpa） |
≥24 |
|
Temperature resistance range of (℃) |
-55～100 |
|
|
fixation time (s) |
＜10 |
|
|
Full fixation time (h) |
24 |
|
|
Maximum filling gap（mm） |
0.10 |
|
Note: SD-32, and SD-31 are recommended
All the above properties are 25℃, measured after 3 days of complete curing Changes in the environment, temperature, and humidity conditions may vary
■ use
① Use dry cloth or sandpaper to remove the surface of dust, oil agent, steel rust, and then wipe with acetone or trichloroethylene, to clean the surface.
② Open the front cover, and flick the tip part with the finger, so that there is no residual liquid, and then poke the hole with a needle.
③ A small drop of agent in the surface, immediately proceed, and keep until hardening, hardening of the number of seconds to several points; about 30 minutes can be connected to the practical strength, and the maximum strength can be reached after 24 hours.
④ After use, wipe the container tip and cover the lid.
Previous: SD103 Instant glue
