SD101 Instant glue
◆Product model: SD101 instant glue
◆Characteristics: SD101 is a single component, fast curing speed, easy to use, strong adhesion relay, extensive adhesive materials, can be used for steel, non-ferrous metals, rubber, leather, plastic, ceramics, glass, wood, etc., but for polyethylene, polypropylene, Teflon products, the material surface needs to be special treatment.
■ Use:
Widely used in electrical appliances, instruments, machinery, electronics, optical instrument, medical treatment, light industry and other industries. Especially suitable for porous surface material then.
■ Technical parameter
|
surveillance project |
SD101 |
|
|
Chemical type |
Cyanoacrylate |
|
|
firm Before |
surface |
Colorless transparent |
|
Dynamic viscosity（mpa.s) |
250 |
|
|
density(g/cm³) |
1：1 |
|
|
Aftercuring |
shear strength （Mpa） |
25 |
|
Tempe rature resistance range（℃） |
-30～80 |
|
|
fixation time （s） |
＜35 |
|
|
Full solid time（h） |
24 |
|
|
Maximum filling gap（mm） |
0.20 |
|
Note: SD-32, and SD-31 are recommended
All the above properties are 25℃, measured after 3 days of complete curing Changes in the environment, temperature, and humidity conditions may vary
■ Usage method
① Use dry cloth or sandpaper to remove the dust, oil agent, steel rust, and then wipe with acetone or trichloroethylene to clean the surface.
① Use dry cloth or sandpaper to remove the dust, oil agent, steel rust, and then wipe with acetone or trichloroethylene to clean the surface.
② A small drop of agent in the surface, immediately continue, and keep until hardening, the number of seconds to several points; in about 30 minutes can be connected to the practical strength, and the maximum strength can be reached after 24 hours.
④ After use, wipe the container tip and cover the lid.
Previous: No More
