S-3911Waterproof adhesive sealant for automotive headlights

Brand: SANDAO

MOQ: 10 Pieces

Delivery time: 15 Day

This product is a fast drying neutral silicone adhesive, no fog, no white, no solvent, no corrosion, no pollution, at room temperature contact moisture curing, paste does not flow. It has excellent moisture resistance, aging resistance and electrical insulation properties, the adhesive material has good adhesion to metals and most plastics, and has excellent cold and heat resistance after curing (-50-250℃).

Product Details

◆ Product model: S-3911aterproof adhesive sealant for automotive headlights

◆Product characteristics:

■ use Applied to the bonding and filling of electronic and electrical products. The bonding and filling between the circuit substrate and the adhesive surface has high thermal conductivity, excellent adhesion, slight corrosion to copper, PC (polycarbonate), such as the company's deoxime type can solve this problem.

■ Packaging, storage and transportation requirements Packaging with aluminum leather tube or plastic tube, with 100ml aluminum pipe and 300mlPE pipe, this product should be stored in a dry and cool place (below 26℃). The shelf life of this product is within 6 months from the manufacturing date.

■ Usage and precautions First clean the bonded sealing surface, and then apply this product on the surface (the thickness should not exceed 6mm). The drying time of this product is less than 15 minutes, and the complete curing is achieved after 24 hours. After the operation, the unused glue shall be tightened immediately and sealed. When used again, if there is a little skin at the seal, it can be removed, do not affect the normal use. In the storage process, there may also be a small amount of curing at the nozzle, which can be used normally after removal without affecting the performance of the product.