SD3214 Strong plastic adhesive

Brand: SANDAO

MOQ: 10 Pieces

Delivery time: 15 Day

Features: This product is a special copolmer, light yellow transparent mucus. This product has strong adhesion, good stability, strong aging resistance after curing, good flexibility, and special transparent curing.

Product Details

◆ Product model: SD3214 strong plastic adhesive

◆ Features: This product is a special technical copolymer, with light yellow transparent mucus. This product has strong adhesion, good stability, strong aging resistance after curing, good flexibility, and special transparent curing.

◆ Environmental protection requirements: meet the RoHS directive and related environmental protection requirements

■ apply PP is suitable for bonding with PP, PE, TPR, ABS, PS, PET, EVA and other materials.

■ usage method (1) Wipe the adhesive surface clean to remove residual oil or release agent on the surface;

(2) thin adhesive on the dry adhesive surface; Method 1: double adhesive: after the surface is half dry (when the adhesive surface by hand, about 3-5 minutes), then the adhesive surface close and compacted to make it close contact.---This method can reach the immediate positioning after pressing the bonding surface, but the test bonding strength is recommended after 24 hours. Method 2: Single side adhesive: one side of the adhesive side of the other side of the adhesive surface, can be used after 24 hours.---This method needs to wait for 5-15 minutes before the preliminary positioning, but it is more economical to glue, the test bonding strength is recommended after 24 hours.(3) The maximum bonding strength is reached in 2-4 days. (4) Different temperature drying speed is different, can be 40-50℃ baking / 5-6H Note: If the glue is too thick, diluted water can be added appropriately. Recommended proportional glue: diluted water =10:1~1:1

■ Matters needing attention To shorten the drying time, the following method can be used: A. If possible, the bonded items can be baked in the oven of 40-50 degrees for 5-6 hours to achieve the full dry effect; B. Temporary and unconditional advice to use the glue method (that is, stick the glue on the paste surface, the glue should not be too thick), and do not use the glue method (that is, pour the glue on the paste surface). 2. Store it in a cool, dry and ventilated place. 3, the shelf life of half a year.